There are several functions that generate a Pattern of values for us for achieving useful things in FoxDot, such as rhythms and melodies. This page is a list of Pattern functions accompanied by descriptions and examples.

Used as input arguments for Foxdot players, these can be treated as patterns themselves and their methods can be applied directly e.g. `PDur(3, 8).reverse()`

. You can also substitute any input argument with a Pattern or TimeVar to create an extended pattern or `Pvar`

. Let’s look at some examples:

>>> # Basic pattern function >>> PDur(3, 8) P[0.75, 0.75, 0.5] >>> # Use a list/Pattern to join together two patterns using the same function >>> PDur([3, 2], [8, 4]) P[0.75, 0.75, 0.5, 0.5, 0.5] >>> # Use a TimeVar to create a Pvar >>> PDur(var([3, 5]), 8) P[0.75, 0.75, 0.5] # Equal to PDur(3,8) P[0.5, 0.25, 0.5, 0.25, 0.5] # Equal to PDur(5,8) after 4 beats

`PStep(n, value, default=0)`

Creates a Pattern of length `n`

with the last element set to `value`

. All other values are set to `default`

.

>>> PStep(5, 4) P[0, 0, 0, 0, 5] >>> PStep(4, "o", "x") P["x", "x", "x", "o"]

`PSum(n, total, lim=0.125)`

Returns a Pattern of length `n`

whose sum is equal to `total`

and each value is roughly equal. All values are divisible by `lim`

, which is also the smallest possible value for each element.

>>> PSum(5, 4) P[1.0, 0.75, 0.75, 0.75, 0.75] >>> PSum(3, 2) P[0.75, 0.75, 0.5]

`PRange(start, stop=None, step=None)`

Returns a Pattern filled with the series from `start`

to `stop`

(non inclusive) with increments of `step`

(defaults to 1). If `stop`

is omitted then the series starts at 0 and ends at `start`

.

>>> PRange(5) P[0, 1, 2, 3, 4] >>> PRange(2, 7) P[2, 3, 4, 5, 6] >>> PRange(4, 14, 2) P[4, 6, 8, 10, 12]

`PTri(start, stop=None, step=None)`

Returns a Pattern filled with the series from `start`

to `stop`

and back again (non inclusive) with increments of `step`

(defaults to 1). If `stop`

is omitted then the series starts at 0 and peaks at `start`

.

>>> PTri(5) P[0, 1, 2, 3, 4, 3, 2, 1] >>> PTri(2, 7) P[2, 3, 4, 5, 6, 5, 4, 3] >>> PTri(4, 14, 2) P[4, 6, 8, 10, 12, 10, 8, 6]

`PSine(n=16)`

Returns a Pattern with `n`

values taken from a basic sine wave function equal distances apart.

>>> PSine(16) P[0.0, 0.3826834323650898, 0.7071067811865476, 0.9238795325112867, 1.0, 0.9238795325112867, 0.7071067811865476, 0.3826834323650899, 1.2246467991473532e-16, -0.38268343236508967, -0.7071067811865475, -0.9238795325112865, -1.0, -0.9238795325112866, -0.7071067811865477, -0.3826834323650904]

`PEuclid(n, k)`

Uses the Euclidean Algorithm to create a Pattern of length `k`

with `n`

number of pulses spread as equally as possible throughout the set. Pulses are represented as a 1.

>>> PEuclid(3, 8) P[1, 0, 0, 1, 0, 0, 1, 0]

`PEuclid2(n, k, lo, hi)`

Same function as `PEuclid`

but replaces the 1’s with `hi`

and 0’s with `lo`

.

>>> PEuclid2(3, 8, "x", "o") P["o", "x", "x", "o", "x", "x", "o", "x"]

`PDur(n, k, start=0, dur=0.25)`

Returns the output of `PEuclid`

as a series of durations where each element is a step of duration `dur`

. The `start`

keyword specifies the starting index of the Pattern.

>>> PDur(3, 8) P[0.75, 0.75, 0.5] >>> PDur(3, 8, 1) P[0.75, 0.5, 0.75] >>> PDur(3, 8, 1, 0.5) P[1.5, 1.0, 1.5]

`PBern(size=16, ratio=0.5)`

Returns a Pattern of length `size`

filled with a random selection of 1s and 0s based on the `ratio`

value, known as a Bernoulli Sequence.

>>> PBern(6) P[1, 0, 0, 1, 1, 0] >>> PBern(6, 0.75) P[0, 1, 1, 1, 1, 0]

`PBeat(string, start=0, dur=0.5)`

Returns a Pattern of durations based on an input string where non-whitespace denote a pulse.

>>> PBeat("x xxx x") P[1, 0.5, 0.5, 1, 0.5] >>> PBeat("x xxx x", start=1, dur=1/4) P[0.25, 0.25, 0.5, 0.25, 0.5]

`PSq(a=1, b=2, c=3)`

Returns a Pattern of square numbers in the range `a`

to `(a + c) - 1`

.

>>> PSq(1, 2, 3) P[1, 4, 9] >>> PSq(2, 2, 5) P[4, 9, 16, 25, 36]